Top Frigidaire Refrigerator Replacement Parts for Reliable Home Repairs

Best for: Top and bottom door shelf repairs

Pros

• Two-piece replacement pack
• Direct fit for 4.5-inch depth
• Fits common top-mount models

Cons

• Does not fit middle door rack

The 240534901 door shelf rack bar from ZHIRENYONG is designed as a direct-fit replacement for fractured perimeter retainers on compatible Frigidaire top-mount refrigeration cabinets. This listing delivers a two-pack bundle, allowing homeowners to swap out both the top and bottom retaining bars during a single repair session. Weighing 12.8 ounces, each molded retainer measures 24.75 inches in total length, 4.5 inches in depth, and features an upright guard rail height of 1-3/4 inches. The manufacturer explicitly emphasizes that this specific model fits only the uppermost and lowermost door positions and will not fit the center door shelf rack, which requires a shallower bracket depth.

Conducting a diy frigidaire refrigerator repair using the 240534901 door shelf rack bar requires matching exact profile dimensions before purchase. The listing specifies compatibility with cabinet model designations beginning with prefixes including FRT18, FFTR18, FFHT18, FFTR2, FRT21, CRT18, CRTE18, CFHT18, and FFHI18. Because door shelves bear continuous dynamic loads from heavy condiment jars, milk jugs, and beverage containers, having a replacement bar with a secure snap-in locking profile ensures groceries remain securely upright. Unlike the enclosed shelving designs seen in a compact frigidaire mini fridge with freezer, full-size kitchen models rely heavily on rigid retainers to withstand rapid door swings without popping free.

This two-piece replacement package suits homeowners looking to resolve cracked end tabs or broken front walls on their outer door shelves. Cross-referenced replacement numbers include AP3214630, 948954, AH734935, EA734935, PS734935, and B004XL3PKY. However, if your refrigerator door has suffered damage across all three storage levels, this set gives way to comprehensive multi-part packages that include the center bar. The manufacturer does not provide warranty coverage for this particular hardware package.

Best for: Side-by-side upper door storage

Pros

• Upgraded premium resin material
• Two-pack configuration
• Certified quality testing

Cons

• Fits upper two door shelves only

The 2 PACK Upgraded 240356402 Refrigerator Door bin package by AMI PARTS supplies replacement door bucket storage tailored specifically for side-by-side Frigidaire refrigerator configurations. Constructed from upgraded clear premium resin, this rectangular bin package weighs 2.66 pounds and features dimensions of 15.4 inches in length, 6.58 inches in depth, and 5 inches in height. The manufacturer emphasizes that this 240356402 refrigerator door bin is engineered to replace damaged, cracked, or cloudy door shelves on the upper two positions of compatible refrigerator doors, meaning it will not fit the wider or deeper bottom door brackets.

Each bin undergoes certified testing to ensure proper fitment across an extensive lineup of side-by-side models, including FFSS2615TE0, LFSS2612TE0, FGHS2631PF4A, FGHS2655PF, FFSS2615TP0, FFSS2615TS2, LGHX2636TF0, and related series. The listing notes broad part cross-referencing, replacing original factory numbers such as 240356407, 240356408, 240356410, 240356411, 240356413, 240430305, 241808205, AP2549958, and PS430122. For homeowners carrying out a frigidaire door shelf replacement, these bins provide clean aesthetic clarity and substantial wall thickness designed to handle jar weights without flexing or popping out of their door track slots.

This two-piece package suits families needing to replace fractured upper bins in large side-by-side models without paying OEM markup. Because it is engineered specifically for side-by-side cabinets, it gives way to rail-style bars if you operate a standard top-freezer model or need lower door bucket replacements. The listing confirms that the materials used are non-polluting and food-safe for daily grocery storage.

Best for: Cracked exterior door handle repairs

Pros

• Sturdy ABS plastic build
• Glossy white finish
• Standard screwdriver installation

Cons

• Mounting screws not included

The AMI PARTS 5304486359 Refrigerator Door Handle offers a heavy-duty structural fix for broken, cracked, or loose exterior refrigerator pull hardware. Molded from improved high-strength ABS plastic with a glossy white finish, this lever-style long-strip handle measures approximately 16.9 inches in length by 4 inches in width (the product text notes an approximate 17-inch length). The manufacturer delivers this replacement as a two-piece package (noted with a unit count of 2 count in product specifications), giving users an identical match or an extra replacement piece. The internal mounting blocks are reinforced to ensure mounting screws remain firmly seated without stripping out under heavy pulling forces.

When conducting exterior DIY repairs on top-mount units, the 5304486359 refrigerator door handle provides direct compatibility across extensive Frigidaire and Electrolux platform prefixes, including CFHT18, CFTR1826LW, DFHT1843MW, FFHI18, FFHI21, FFHT15, FFHT16, FFHT18, FFHT2021QW, FFHT21, FFTI2126NW, FFTR15, FFTR18, and LFTR1814L. It directly substitutes legacy part numbers like 5304506469, 5304510038, 5304504507, 5304497105, 242059501, AP6036330, and PS11731975. Installation is handled using a standard manual screwdriver to secure the handle onto the existing door mounting studs. Those accustomed to the integrated pocket handles of a compact appliance like a frigidaire small fridge will appreciate how this full-size external handle restores solid mechanical leverage to tight door gaskets.

This component is ideal for homeowners whose original white plastic door pull has snapped near the fastener bosses due to door seal suction. The manufacturer backs this part with a 365-day return and exchange policy. However, users needing interior storage shelves or pan brackets will need to look elsewhere in this guide, as this part only addresses exterior door opening hardware.

Best for: Upper fresh produce crisper replacement

Pros

• Clear see-through plastic
• Direct upper crisper replacement
• Broad model compatibility list

Cons

• Humidity slider not included
• Not for lower crisper slot

The UPGRADED Lifetime Appliance 240351061 Crisper Bin is a dedicated replacement drawer engineered specifically for the upper fresh produce station in select Frigidaire side-by-side refrigerators. Weighing 3 pounds, this clear crisper pan comes in package dimensions of 30 by 15 by 5 inches and is molded to slide smoothly into upper cabinet tracks. The listing emphasizes that this drawer is not a universal container and only replaces the top crisper slot; it will not fit the lower crisper opening due to differences in rear cabinet contouring and slide rail dimensions. Additionally, the manufacturer notes that the clear bin does not include the humidity adjustment control slider, meaning you must transfer the slider trim from your existing broken drawer.

Verifying your exact model tag before ordering is essential for the 240351061 crisper bin. The listing specifies fitment for models beginning with prefixes such as PHSC39, PLRS26, FRS6L7, PHSC23, 253.44, 253.5, BFHS26, BGHS26, CRSE26, DGHS26, FFUS26, FGEX26, FGHC23, GLHS26, LFUS26, and PLHS26. It cross-references dozens of OEM part numbers, including AP4424911, 240351005, 240351062, 240351003, 240351041, 240351048, 1512515, 240351056, AH2361214, EA2361214, and PS2361214.

This replacement bin suits homeowners dealing with cracked drawer bases, cracked guide ribs, or shattered front walls caused by overloaded vegetable storage. If your broken bin is the lower meat pan or bottom crisper, or if you need sliding track brackets rather than the drawer itself, this product gives way to the pan hanger slide kit reviewed further below. Note that the listing indicates an AC power source under specifications, though this clear storage box operates as a passive mechanical drawer.

Best for: Complete three-tier door rack restoration

Pros

• Includes both middle and outer bars
• Tough ABS plastic construction
• Includes three total retainers

Cons

• Incompatible with 240338001 series

The Upgraded 240534901 X2 & 240534701 X1 door shelf retainer bar package manufactured by feikeer provides a complete three-piece replacement set for Frigidaire and Kenmore refrigerator doors. While single or two-pack listings supply only the outer retainers, this package specifically bundles two 240534901 bars for the top and bottom door positions alongside one 240534701 bar tailored specifically for the intermediate middle door shelf rack. Constructed from high-quality ABS plastic, all three retainer bars undergo factory testing to ensure flexibility and crack resistance when snapped into cabinet door liner slots.

Having the complete three-bar assembly eliminates guesswork during a comprehensive door storage overhaul. The manufacturer specifies compatibility with models starting with WRT18, WRT1G, WRT21, WRT8, WWTR18, and 25331 series. Part 240534901 replaces AP3214630, PS734935, 948954, AH734935, and EA734935, while part 240534701 replaces AP3214631, PS734936, and EAP734936948952. The listing cautions buyers that these bars do not replace numbers 240338001, 240535101, 240535001, or 280535201. Sizing differences between middle and outer door racks are standard across domestic refrigerators, much like internal layouts vary when comparing full-size models to a specialty frigidaire vintage mini fridge.

This bundle is the ideal solution for households where multiple door bars have degraded or snapped over years of service. It provides all three required tiers in one shipment backed by a 1-year warranty. It gives way to individual bins if your unit uses enclosed box buckets rather than open retention rails, but for traditional bar-style doors, it offers total multi-tier renewal.

Best for: Sagging deli pan rail repairs

Pros

• Includes left and right rails
• Durable ABS construction
• Simple side-mount screw installation

Cons

• Installation hardware not included

The 240530601 and 240530701 refrigerator pan hangers replacement set, supplied by KCSUPPLIER and manufactured by FETIONS, restores suspended meat and deli drawer functionality beneath refrigerator shelves. Molded from high-density Acrylonitrile Butadiene Styrene (ABS) plastic, this matched pair weighs 3.2 ounces and ships in a compact package measuring 16.61 by 2.56 by 0.75 inches. The pack contains one left-side rail hanger (240530601) and one right-side rail hanger (240530701). When deli pans are overloaded with cheeses and cold cuts, factory plastic tracks often snap along the screw mounting bosses, causing the entire tray to sag or fall onto the shelf below.

Performing this repair is straightforward: cut the power to the unit, put on work gloves, slide out the upper tray, and remove the rear retaining screws to unseat the cracked bracket before side-mounting the replacement rails. The left hanger replaces 240460401, PS430916, EAP430916, 917557, and AP2116589, while the right hanger replaces 240460501, AP2116590, and PS430917. This 240530601 pan hanger set fits broadly across Frigidaire, Crosley, Gibson, Kelvinator, Kenmore, and White-Westinghouse models sharing the same internal cabinet frame design.

This kit is specifically suited for DIYers whose deli drawer has fallen off its overhead tracks. It replaces the mounting rails rather than the clear plastic drawer body itself. If your deli drawer basin is broken, you will need a separate bin replacement, but if the drawer is intact while the slide mechanism has fractured, this rail set completely resolves the issue without unnecessary component replacement.